安裝服務費（淋浴拉門長度 1.5 公尺或以下）

Professional on-site installation service for Shower Screens, carried out by qualified external contractors engaged for Shower Screen installations.

Service scope – included

• Site check of the shower area and surrounding surfaces to confirm suitability for the Shower Screen, including wall condition, flatness, structural support, tile finish, floor level, shower tray or curb condition, available fixing surfaces and clearance from nearby fixtures.

• Positioning and marking of the Shower Screen according to the approved design drawing, specified glass configuration, shower layout and alignment with the walls, shower tray, floor, vanity and other bathroom fixtures.

• Installation of the supplied wall channels, brackets, hinges, supports, handles, seals and other approved mounting hardware suitable for the wall type and Shower Screen configuration.

• Secure installation of the fixed glass panels, doors and associated components onto the prepared walls, floor, shower tray or curb.

• Installation and adjustment of shower doors, where applicable, to confirm smooth opening, closing, alignment and operation.

• Application of approved sanitary-grade silicone sealant and installation of supplied seals at the required joints to help provide a neat, water-resistant enclosure.

• Final level, plumb and alignment checks to ensure the Shower Screen is straight, stable and properly aligned with the surrounding walls and floor.

• Functional check of doors, hinges, handles, rollers, brackets, seals and other supplied hardware, where applicable.

• Basic cleaning of the work area after installation and briefing the customer on care, daily use and maintenance recommendations for the Shower Screen.

• For larger or heavier glass panels, safe handling by two or more installers where necessary to reduce the risk of damage or injury.

Customer responsibilities / prerequisites

To ensure a smooth installation for the Shower Screen, please confirm and prepare the following before the installation date:

• Wall construction is complete, structurally sound and suitable to support the Shower Screen and its mounting hardware.

• All demolition, tile work, waterproofing, plastering, painting, flooring, shower tray, curb and related bathroom works are completed before installation.

• Walls and floors are sufficiently level, plumb, flat and stable for the approved Shower Screen design.

• Waterproofing is fully completed and cured before drilling or fixing work begins.

• The installation area is fully cleared of old Shower Screens, shower doors, furniture, packaging, tools and debris, with clear access to the shower area.

• The final Shower Screen position, dimensions, door-opening direction, panel configuration and orientation are confirmed according to the approved design drawing.

• Sufficient clearance is provided for shower doors, hinges, handles, seals and other moving or projecting components.

• The shower tray, curb, floor and wall surfaces are complete and able to receive the specified fixings and sealant.

• All required products, including glass panels, doors, wall channels, brackets, hinges, handles, seals, screws and other mounting hardware, are delivered and on site before installation.

• Any required wall reinforcement, concealed blocking or suitable anchors are provided in advance where the wall construction cannot safely support the Shower Screen using standard fixings.

• The shower area is not used until the silicone sealant and other installation materials have adequately cured.

• After installation, the customer must inspect the Shower Screen for any water leakage around silicone-sealed joints and check all functional components, including door alignment, opening and closing, hinges, handles, rollers, brackets, supports and seals. Any defects or concerns must be reported to INFINITE within 72 hours of installation, together with relevant photos or videos where applicable. If no concerns are reported within this period, the installation will be deemed completed and accepted by the customer.Any subsequent adjustment, follow-up visit or rectification requested by the customer that is not attributable to an installation defect or the installer’s workmanship may be subject to additional charges.

Not included in this service

• Wall cutting, chasing, reinforcement, levelling, plastering, tiling, waterproofing, flooring, shower tray installation, curb construction or other wall and floor preparation works.

• Correction of uneven, out-of-plumb, damaged or unstable walls, floors, shower trays or curbs.

• Relocation or installation of plumbing, drains, shower fittings, faucets or other bathroom services.

• Modification of cabinetry, vanity units, tiles, wall finishes, flooring or other surrounding fixtures.

• Removal or disposal of existing Shower Screens, shower doors, tiles, furniture or general demolition debris.

• Supply of the Shower Screen, glass panels, doors, wall channels, brackets, hinges, handles, seals, fixings or other components unless specifically stated in the quotation.

• Cutting, drilling, grinding, polishing, resizing or other modification of glass panels or supplied Shower Screen components on site, unless specifically included in a separate package.

• Installation of additional shelves, towel rails, grab bars, shower accessories or other items not supplied with the Shower Screen.

• Repair of defective, unsafe or non-compliant existing walls, floors, waterproofing, shower trays or curbs.

• Any plumbing, basin, faucet, vanity, cabinet or electrical installation works.